Filter
Top Products
TRANSFER BOX
OVERHAUL 9
15. Using a mallet, drive output shaft out of front
output housing.
NOTE: If it is necessary to use a hand
press to remove output shaft, position
thrust button LRT-370-11/2 between shaft
and press mandrel.
16. Noting its fitted position, remove dog clutch
from output shaft.
17. Noting its fitted position, remove bearing
spacer from output shaft.
18. Taking care not to damage front output
housing, remove and discard output shaft oil
seal.
19. Using suitable circlip pliers, remove and
discard circlip retaining output shaft bearing.
20. Support front output housing on suitable blocks
of wood.
21. Using a soft metal drift, drive output shaft
bearing out of housing; discard bearing.