Filter
Top Products
TRANSFER BOX
OVERHAUL 5
32. Slacken locknut and remove differential lock
warning lamp switch from front output housing.
33. Noting fitted position of longest bolt, remove 8
bolts securing front output housing to main
casing.
34. Remove front output housing.
NOTE: Dowel located.
35.
Up to serial no. 288709E:
Remove and
discard gasket.
CAUTION: Do not carry out further
dismantling of front output housing at this
stage.
36. Noting their fitted position, remove shoulder
bolt, 5 bolts and 2 washers securing rear
output housing to main casing.
37. Remove rear output housing.
NOTE: Dowel located.
38.
Up to serial no. 288709E:
Remove and
discard gasket.
CAUTION: Do not carry out further
dismantling of rear output housing at this
stage.