Filter
Top Products
TRANSFER BOX
14
OVERHAUL
Intermediate gears
1. Secure intermediate gears in a soft-jawed vice.
2. Using a soft metal drift, drive intermediate shaft
bearing track out of gears; discard bearing
track.
3. Remove and discard circlip.
4. Repeat above procedure for remaining bearing
track.
Mainshaft input gear assembly
NOTE: Defender input gear illustrated.
1. Secure hand press LRT-99-002 in a vice.
2. Assemble collars LRT-41-003 around bearing
to be removed.
3. Position mainshaft in hand press, remove and
discard bearing.
4. Repeat above procedure for remaining
bearing.