Filter
Top Products
TRANSFER BOX
OVERHAUL 7
COMPONENT DISMANTLING
High/low cross shaft housing
1. Slacken locknut and remove neutral warning
lamp switch - Range Rover Classic only - if
fitted.
2. Remove setscrew securing high/low selector
finger to cross shaft.
3. Withdraw cross shaft from housing, recover
high/low selector finger.
4. Remove and discard ’O’ ring.
Front output housing
1. Remove 7 bolts securing differential lock
selector side cover, remove cover.
2.
Up to serial no. 288709E:
Remove and
discard gasket.
3. Remove 3 bolts securing differential lock
selector housing, remove housing and selector
as an assembly.
4. Remove and discard ’O’ ring from selector
housing.
5. Remove plug securing differential lock detent
spring and ball.
6. Remove detent spring.
7. Remove ball using a stick magnet.
CAUTION: Suitably identify plug, detent
spring and ball to their fitted positions, do
not interchange with high/low selector
shaft detent components.