Filter
Top Products
TRANSFER BOX
2
OVERHAUL
11. Release staking from intermediate shaft nut,
remove and discard nut.
12. Remove bolt securing anti-rotation plate,
remove plate.
13. Using a soft metal drift on threaded end of
intermediate shaft, drive shaft out of main
casing.
14. Remove and discard ’O’ ring from intermediate
shaft.
15. Remove and discard ’O’ ring from main casing.
16. Wrap a suitable length of wire around
intermediate gears and using assistance, lift
gears out of main casing.
17. Remove and discard 2 taper roller bearings
from intermediate gears.
18. Remove and discard collapsible spacer from
intermediate gears.
CAUTION: Do not remove bearing tracks
at this stage.