Filter
Top Products
TRANSFER BOX
OVERHAUL 25
Differential
1. Check sun and planet gears for wear, cracks
and chipping of teeth.
2. Check cross shafts and recesses in both
halves of differential carrier for damage and
wear.
CAUTION: Ensure planet gears are
retained with their respective shafts.
3. Check retaining ring for distortion.
4. Check splines of differential shafts for wear
and damage.
5. Check teeth of high/low hub for cracks,
chipping and uneven wear.
6. Check selector fork groove width in high/low
hub:
Groove width = 7.5 to 7.6 mm (0.295 to 0.30 in)
7. Check splines and teeth of high/low selector
sleeve for uneven wear, cracks, damage and
chipping.
8. Check teeth of high and low range gears for
cracks, chipping and uneven wear.
9. Check high range gear bush for wear and
damage.