Cobra Electronics MC 600Ci GPS Receiver User Manual


 
72
Owner's Manual
“DISTANCE”: Sets the distance unit among Nm = nautical miles, Sm =
status miles and Km = kilometers.
“SPEED”: Sets the speed unit among Kts = knots, Mph = miles per hour
and Kph = kilometers per hour.
“DEPTH”: Sets the depth unit among Feet, Meters and Fathom.
“ALTITUDE”: Sets the altitude unit among Ft = Feet, FL = Flight Level and
Mt = Meters.
“TIME REFERENCE”: Selects among Local Time or UTC. See the
diagram on Par. 9.3 for entering your Local time offset. Setting this allows
you to view the correct local time.
“TIME FORMAT”: Sets you preferred time format among 12 Hour and 24
hour.
“DATE FORMAT”: Sets you preferred date format among MM-DD-YY
(month-day-year) and DD-MM-YY (day-month-year).
“WIND SPEED”: Sets the wind speed unit among Kts = Knots, m/s, Kph =
kilometers per hour, Bft and Mph.
5.2.7. Pages On/Off
Pages can be turned ON or OFF and pressed buttons can be set from this
page. Please see Par. 3.1 for detailed information.
5.2.8. GPS Settings
When the GPS device is connected properly, the GPS Settings menu
provides the access to GPS functions and features connected with the
satellites information used for further navigation. All the options are
described below:
“INTERNAL GPS”: Turns ON or OFF the Internal GPS.
“RESTART GPS”: If GPS is connected, restarts all GPS processes. Once
executed, the message "...OK" is shown. Press the ESC button to exit.
“DIFF CORRECTION SOURCE”: If GPS is connected, sets the kind of
Differential Correction used by the GPS, WAAS/EGNOS.
“COORDINATE SYSTEM”: The possible choices are ddd mm ss (degrees,
minutes and seconds), ddd mm.mm (degrees, minutes and hundred of
minutes), ddd mm.mmm (degrees, minutes and thousands of minutes), TD
(TD function allows converting GPS coordinates to Loran-C coordinates and
vice versa, see TD in the Par. 9.1) and UTM (also see UTM in the Par. 9.1).
“FIX DATUMS”: Sets the datum reference used by the GPS receiver
connected to (or integrated in) the chartplotter so that the chartplotter
converts the position received from the GPS to the Map Datum currently
Units
GPS Settings