Filter
Top Products
42
Owner's Manual
3.8.2.2. Available Layouts of COMBO MODE Page
The data fields in the COMBO MODE Page are the same as in the SPLIT
MODE Page and can be customized to HIDE, 2 or 4 through the MENU
button. By default the COMBO MODE is set to Hide data fields.
3.8.2.3 Changing Data Options
The content of each data box can be adjusted to user’s requirements. To
customize data options follow the procedure described in Par. 2.7.2 Changing
Data Fields.
3.8.2.4. Changing the Size of Windows
It is possible to change the ratio for the two displayed combo screen by
changing the size of each of them or both simultaneously. To activate this
option follow the procedure below:
1. Press the MENU button to activate the MAIN Menu.
2. Use the UP and DOWN CURSOR buttons to highlight “ADJUST SPLIT”
and press the ENTER button.
3. A yellow line is shown indicating the ability to drag the boundary of each
separate page. Also the arrow icons indicating the available directions to
move the line will be visible.
4. In case of vertical combo screens: Left and Right arrow icons will appear .
Use the RIGHT and LEFT CURSOR buttons to change the ratio between
pages. Press the ENTER button to save the changes and leave the Adjust
Split Mode.
5. In case of horizontal combo screens: Up and Down arrow icons will
appear. Use the UP and DOWN CURSOR buttons to change the ratio
between pages. Press the ENTER button to save the changes and leave
the Adjust Split Mode.
Combo Mode Page