Filter
Top Products
1. Push <DEST>.
2. Highlight [Home] and push <ENTER>.
3. The home location is displayed and set as
the destination.
INFO:
If the home location is not stored yet, the
system will automatically display a screen for
storing it.
“Storing location” (page 6-2)
4. The entire route to home is shown on the
map. Highlight [Start] after confirming the
location of the displayed destination, and
push <EN TER>. The system sets the
destination to the selected location and
starts calculating a route.
Voice command
1. Push <TALK
> located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To set the home location as the destination:
“Navigation” “Home” (Standard mode)
“Home” (Alternate command mode)
SEARCHING FROM ADDRESS BOOK
A location stored in the Address Book can be
set as the destination to which the system
calculates a route. To utilize this function more
effectively, destinations that are often traveled to
should be stored in advance.
1. Push <DEST>.
2. Highlight [Address Book] and push
<ENTER>. A list screen is displayed.
3. Highlight the preferred location from the list
and push <ENTER>.
INFO:
Selecting [Sort] displays a list of various sort
functions. To use the sort functions, stored
locations must be set in advance.
Setting destination 4-11