Filter
Top Products
2-4 Getting started
*
1
<ENTER>:
Tilt to highlight an item on the screen or
adjust a setting. Push to select the high-
lighted item.
If this button is pushed while a map is
displayed, the map menu screen is dis-
played.
“Map menu screen” (page 2-13)
Push and hold to display the start menu.
“Start menu” (page 2-8)
If this button is tilted up while the audio
function is activated and the map or status
screen is displayed, the audio system can
be operated.
*
2
<+ −>:
Use to adjust the volume. These buttons
have the same function as that of the
volume control knob. Refer to the vehicle
Owner’s Manual.
*
3
< >:
Push this button during a setting operation
to return to the previous screen. In a
settings screen, this button can also be
used to apply the setting.
*
4
<TALK >:
Push to start the voice recognition mode. If
the voice recognition mode is already
activated, pushing this button cancels the
voice guidance and you can speak a voice
command immediately.
*
5
<SOURCE> :
Use to switch the audio mode (source).
Refer to the vehicle Owner’s Manual.
The navigation system starts when the ignition
switch is turned to the ACC or ON position.
NOTE:
Do not keep the navigation system on with
the engine stopped. Doing so may dis-
charge the vehicle battery. When you use
the navigation system, always keep the
engine running.
STARTING THE SYSTEM