Filter
Top Products
81
3.13.1.4 Monitoring Dip switch setting of DIDO Controllers
(1) Click [Option] in the DIDO controller (66DC)
input/output status monitoring screen and
select [DIP switch setting monitoring] in
the sub-menu.
(2) The DIP switch setting is monitored, and
DIP switch setting monitoring screen
will appear.
* The pressed (sunken) button
shows
the current status.
(3) Click [File output] to save the monitored information as a CSV file.
Refer to section [3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC) (5)].
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.6.]
(4) Click [Close] to return to the DIDO controller (66DC) input/output status monitoring screen.
3.13.1.5 Operation time reset
(1) Click [Option] in the DIDO controller (66DC)
input/output status monitoring screen and
select [Operation time reset] in the sub-menu.
(2) Operation time reset screen will appear.
(3) Check the checkbox of to reset the operation time of the selected channel.
(4) Click [Send settings].
(5) The message ”Settings will be sent. OK?” will appear, click [Yes].
The setting will be applied to the unit.
(6) The message ”Settings have been sent.”will appear, click [OK].
(7) Click [Close] to return to the DIDO controller (66DC) input/output status monitoring screen.