Filter
Top Products
37
* About LM ADAPTER
Operation Monitor
Item Performed Here
Operation status of LM ADAPTER, current values of network variable and configration property,setting status of
switch or the like.
[Refer to 3.7 Operation Monitor]
1 Screen Transfer Operation
To move to the screen monitoring LM ADAPTER operation,
select LM ADAPTER from the main screen.
(LM ADAPTER is expressed by )
When LM ADAPTER is selected,you may not monitor
other units.
Same operation procedure as that of other units is applicable
to other main screens.
2 Screen Functions and Operations
- The operating condition and operating data are displayed every minute.
- [Current time] will be displayed.During a time when saving data,[Monitor ID] will also be displayed.
[Refer to 5.2 Operation Status Monitor Data.]
(1)[Operation Button]
[Operation control] will not be displayed.
Click on [Return] to end the operation status monitor and return to the Main Screen.[Refer to 3.7.1(8)]
(2)[Menu Bar]
[Return] , [Print] , [Graph] and [Help] are displayed on the menu bar.
Neither [Graph] nor [Ref.] may be used. Other menus are same as that of other units.
Menu Ba
r
Operation Button