Mitsubishi Electronics WT03939X20 Automobile Accessories User Manual


 
123
4.6.4 Text Convert
(1) Clicking to display Data list screen
containing the file desired to edit.
(Text conversion can also be adapted to the Pre-error
data. For the converting method, refer to 4.5.1(5).)
(2) Click on [Monitor Data
] desired to convert into text
format.
(3) Click on .
The screen to confirm the selected monitor data.
Clicking on provides text conversion
processing and then a file name will be displayed.
[Refer to 5.4 Text Convert Data]
In the case of Operation Monitor, clicking displays Data Transfer Screen prompting you to
select the object and method of the conversion.
(a) Click on [units].
Set the [Sampling Time
] between 1-min and 10-min.
(b) Click on .
”Converting! Please wait for a moment.” will be appeared,
then a file name will be displayed.
[Refer to 5.4 Text Convert Data]
(c) Click on to transfer the data of all units.
(d) Click on to end the Data Transfer Screen.
* During processing operation, the progress ratio will be displayed.
4.6.5 Monitor Data information convert
- Changing the name of monitor data
Clicking the Edit of the menu bar while focussing the
monitor data name on the Monitor Data of which name is
desired to be changed on the Screen listing each data will
display the editing screen.
On this screen, the name of Monitor Data or other relevant
information can be edited.