Filter
Top Products
79
(5) The current time is monitored, and
Date/Time setting screen will appear.
(6) Set the current date and time.
(7) Click [Send settings].
(8) The message ”Are you sure you want to send the
Date/Time setting?” will appear. Click [Yes].
(9) Time is set to DIDO Controller, and the message
“Settings have been sent.” will appear.
Click [OK].
(10) Click [Close] to return to the
DIDO controller (66DC) input/output status monitoring screen.
3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC)
(1) Click [Option] in the menu bar and
select [DIDO/AI/PI] -> [DIDO setting] in
the sub-menu.
(2) Click of the unit (DIDO Controller)
to be set or monitored on the Main screen.
(3) The input/output status is monitored, and
DIDO controller (66DC) input/output status
monitoring screen will appear.
[Operation output status]
[Operation input status]
The
ON/OFF status for each contact is
monitored and displayed.
[Error input status]
The error input status for each contact is
monitored and displayed.
[Operation output time(min.)]
[Operation input time(min.)]
The integrated operation time for operation
ON/OFF time is monitored and displayed.
(4) Click [Monitor update] to update the monitoring status.
(5) Click [File output] to save the monitored information as a CSV file.
1) Click [File output].
2) The message “Please select symbols for use as
delimiters.” will appear. Click [Use ,] or [Use ;].
3) [File] is output and saved.
The output destination folder path will be displayed.
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.6.]