Filter
Top Products
If you select Yes, the second part begins.
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part is
saved automatically.
Canceling during the first or second part
of individualization
X
Select Cancel.
A prompt appears asking whether you
really do want to cancel.
X
Select Yes or No.
If you select Yes, individualization will be
canceled. The data from the part at which
you exited is not saved.
If you select No, the part at which you
stopped begins again.
Deleting existing individualization data
X
Select Vehicle Q System Q Voice
Control Q Delete
Individualization.
A prompt appears asking whether you
really do want to delete.
X
Select Yes or No.
The individualization data will either be
deleted or not, depending on your
selection.
Setting the system language
X
Select Vehicle Q System Q
Language.
The language list appears. A dot #
indicates the current setting.
X
Changing setting: Select the desired
language.
The language is set.
i
For some system languages, the
navigation announcements are made in
English (Y page 135).
Assigning the favorite button
You can assign the following predefined
functions to favorite button g:
R
Driver's Seat Massage (Y page 219)
You can switch the massage function for
the driver’s seat on or off.
R
Front Passenger Seat Massage
(Y page 219)
You can switch the massage function for
the passenger seat on or off.
R
Driver and Front Passenger Seat
Massage (Y page 219)
You can switch the massage function for
the driver’s and passenger seat on or off.
R
Display OFF (Y page 92)
You can use the favorite button to switch
the COMAND display on or off.
R
Repeat Navigation Command
(Y page 135)
When route guidance is activated, you can
use the favorite button to generate or call
up a current navigation announcement.
X
Select Vehicle Q System Q
Favorites Button *.
The list of predefined functions appears.
The dot # in front of the list entry indicates
the current setting.
X
Changing setting: Rotate cVd and select
desired function.
X
Saving setting and exiting the menu:
Press W.
94
COMAND system settings
Control systems
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 94