Filter
Top Products
be accessed when the respective mobile
phone is connected to COMAND via the
Bluetooth
®
interface.
Importing contacts manually
i
Contacts that were imported manually
can always be accessed. Contacts that
were imported automatically can only be
accessed when the respective mobile
phone is connected to COMAND via the
Bluetooth
®
interface.
Data can be imported
R
from memory card
R
via the Bluetooth
®
interface (for example
Bluetooth
®
phone or Bluetooth
®
PC)
X
Importing data: Load the memory card or
activate Bluetooth
®
in COMAND and the
Bluetooth
®
mobile phone/PC. Refer to
operating instructions of the respective
Bluetooth
®
device.
X
Select Data/Connections Q Download
Contacts Q From Memory Card or Via
Bluetooth.
X
Select Add or Overwrite.
i
The contact data, or vCards
22
, must be
sent from the Bluetooth
®
device to
COMAND. Refer to operating instructions
of the respective Bluetooth
®
device.
X
Stopping data import: Press W.
or
X
Press %.
When the data have been imported, the
message Import successful. appears in
the COMAND display.
When the COMAND phone book memory is
full, the message Memory full.
Contacts could not be imported
completely. appears in the COMAND
display.
i
When switching to another main function,
such as navigation, while importing data via
Bluetooth
®
, the import is aborted. The
import of vCards from a memory card
however will be continued.
Accessing contacts/details
You can access contacts via the list or the
predictive speller.
Basic address book display
:
List
¤ Entry containing data that can be used
for route guidance
¦ Entry with voice name, see Voice
Control System (Y page 237)
¥ Address book entry
d Mobile phone entry
0 SIM card entry
BT Bluetooth
®
entry
22
vCards are electronic business cards used by e-mail applications, mobile phones, PADS, etc. to exchange
contact information.
160
COMAND telephone
Control systems
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 160