Filter
Top Products
Help window
You can use the help window to view a
selection of valid commands on the COMAND
display.
The help functions can be switched on or off
via COMAND in the System menu
(Y page 93).
Entering digits and spelling
Entering digits
R
Digits from “Zero” to “Nine” may be used.
R
Speaking phone numbers in digit blocks of
3 to 5 digits has proven a very reliable
method for the input of phone numbers.
Spelling
R
The letters of the English alphabet and the
digits 0 - 9 may be used.
R
Speak the letters in blocks of 5 - 7 letters
at a time.
R
Speak each individual letter clearly.
What to do if ...
Problem Possible cause/consequence Suggested solution
The Voice
Control
System does
not
recognize
commands.
You have not operated the system
from the driver’s seat.
X
Operate the Voice Control System
only by the driver as the
microphone is geared to the driver
side.
You have spoken unclearly, too
loudly or too quietly.
X
Speak the commands in a
continuous manner using a normal
tone.
The blower could be set to the
highest setting, vents could be
pointing at microphones or wind
noise could be created due to open
windows.
X
Avoid loud disturbances.
268
Voice Control System troubleshooting
Control systems
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 268