Filter
Top Products
R
Bluetooth Q Search for Bluetooth
Devices, Bluetooth activated. For
information on the Bluetooth
®
interface
see (Y page 151).
R
Upload/Download Data Q Copy Data
to Storage Medium, Import Data from
Storage Medium (Y page 95)
R
Reset: Resetting the COMAND system to
factory settings
Display settings
Switching the display on or off
X
Switching off: Select Vehicle Q
Display OFF.
X
Switching back on: Rotate cVd or slide
ZVÆ, XVY or press W.
or
X
Press button u.
Setting the display design
X
Select Vehicle Q System Q Display.
X
Select Day Mode, Night Mode or
Automatic.
i
In the Automatic setting, COMAND sets
the display design automatically. The
setting depends on the information
retrieved from the vehicle's light sensor.
Time settings
The time of day is set automatically according
to the GPS signal and the selected time zone.
All time information always applies to the
local time at the current vehicle position.
Time information changes when entering a
different time zone.
i The correct time zone, daylight savings
time/standard time and the time itself
must be set for the following navigation
system functions to operate correctly:
R
Route guidance on routes with time-
dependent traffic guidance
R
Calculation of estimated arrival time
The settings are adopted for the analog
clock in the dashboard.
Change the settings in the following order:
1. Time zone
2. Daylight savings time/standard time
3. Time lag (only necessary in exceptional
cases)
Setting the time zone and switching
between daylight savings time and
standard time
X
Setting time zone: Select Vehicle Q
System Q Time Q Time Zone.
The country list appears. The dot # in front
of a list entry indicates the current setting.
X
Select the country in which you are.
A time zone list may also be displayed,
depending on the selected country.
X
Select the desired time zone.
Subsequent operation depends on
R
whether your navigation system has GPS
reception
R
which country you have set previously
You may either switch between Daylight
Savings Time (Summer) and Standard
Time.
92
COMAND system settings
Control systems
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 92