Filter
Top Products
Multicontour seats, front
i
If PRE-SAFE
®
has been activated, the air
pressure in the air chambers (on the sides
of the seat cushion and seat backrest) of
the front multicontour seats is increased.
i
When you adjust the multicontour seat,
noises may result from pumping air into or
releasing air out of the air chambers.
To support the spine, you can individually
adjust the seat backrest contour of the front
seats by regulating the air pressure in the air
chambers of the multicontour seat.
You can adjust the following air chambers:
R
Sides of seat cushion
R
Sides of seat backrest
R
Seat backrest curvature in lumbar area
R
Seat backrest curvature in shoulder area
The settings are made on the COMAND
display.
Adjusting sides of seat cushion
This function is used to adjust the air
chambers in the sides of the seat cushion.
X
Select seat (Y page 216).
X
Selecting Seat Sides: Slide XVY or
rotate cVd.
X
Confirming selection: Press W.
A scale appears.
:
Scale
;
Cursor
=
Current setting
X
Slide ZVÆ or rotate cVd until desired
setting is reached.
X
Saving setting: Press W.
Adjusting seat backrest sides
This function is used to adjust the air
chambers in the seat backrest sides.
X
Select seat (Y page 216).
X
Selecting Seatback Sides: Slide ZVÆ or
rotate cVd.
X
Confirming selection: Press W.
A scale appears.
X
Slide ZVÆ or rotate cVd until desired
setting is reached.
X
Saving setting: Press W.
218
COMAND seats
Control systems
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 218