Mercedes-Benz 2010 S550 Automobile User Manual


 
The message Call Failed appears in the
multifunction display for approximately
10 seconds.
Should this occur, assistance must be
summoned by other means.
i
During the emergency call the telephone
is switched off automatically and must be
switched back on to make a call.
i
The “911” emergency call system is a
public service. Using it without due cause
is a criminal offense.
Initiating an emergency call manually
X
Briefly press on cover ; to open.
X
Press SOS button : briefly.
The indicator lamp in SOS button : will
flash until the emergency call is concluded.
X
Wait for a voice connection to the
Customer Assistance Center.
X
Close cover ; after the emergency call is
concluded.
G
Warning!
If you feel at any way in jeopardy when in the
vehicle (e.g. smoke or fire in the vehicle,
vehicle in a dangerous road location), please
do not wait for voice contact after you have
pressed the emergency button. Carefully
leave the vehicle and move to a safe location.
The Customer Assistance Center will
automatically contact local emergency
officials with the vehicle’s approximate
location if they receive an automatic SOS
signal and cannot make voice contact with the
vehicle occupants.
X
Terminating calls: Press button ~ on
the multifunction steering wheel.
or
X
Press the respective button for ending a
telephone call on the telephone keypad.
Roadside Assistance button
X
Open the front armrest storage
compartment (Y page 382).
X
Press and hold Roadside Assistance
button : for longer than 2 seconds.
A call to a Mercedes-Benz Roadside
Assistance dispatcher will be initiated. The
indicator lamp in Roadside Assistance
button : will flash while the call is in
progress. The message Connecting
Call will appear in the multifunction
display. Roadside Assistance
Activated appears in the COMAND
Display. The audio system or the COMAND
system is muted.
When the connection is established, the
message Call Connected appears in the
multifunction display. Roadside
Assistance Activated appears in the
COMAND display. The Tele Aid system will
transmit data generating the vehicle
identification number, model, color and
location (subject to availability of cellular and
GPS signals).
Useful features
391
Controls in detail
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 391
Z