Filter
Top Products
Selecting a wave band
You can set the wave band with the following
commands:
R
“FM”
R
“AM”
R
“Weatherband”
“Next station”, “Previous station”
The following commands are used to start the
station search and to tune in the next station:
R
“Next station”
R
“Previous station”
“Next Category”, “Previous Category”
You can use the following commands to
change the category on satellite radio:
R
“Next Category”
R
“Previous Category”
Selecting frequency (FM range)
You can select frequencies within the FM
range (87.9 to 107.9 MHz) directly. The Voice
Control System also recognizes the words
“Frequency”, “Point” and “Megahertz”.
Sample dialog:
\
Ninety five point five megahertz.
The Voice Control System tunes the
radio to frequency FM 95.5.
Selecting frequency (AM range)
You can select frequencies within the AM
range (530 to 1710 kHz) directly. Voice
control also recognizes the words
“Frequency” and “Kilohertz”.
Sample dialog:
\
Five hundred and thirty kilohertz.
The Voice Control System tunes the
radio to frequency AM 530.
“Save station”
Using the “Save station” command you can
give a voice name to the station currently
selected. You can also use this command to
improve voice recognition for difficult names
or if you want to use a name of your own. You
could, for example, save a station with the
name “Favorite station
37
”.
When you have given the command, the Voice
Control System prompts up to three times to
say the station name. When repeating the
station name, make sure that you pronounce
it in exactly the same way as you did the first
time. Otherwise, the name cannot be saved
and the Voice Control System aborts the
saving procedure.
Sample dialog:
\
Save station.
^
Please say the station name.
\
Favorite station
37
.
^
Please repeat the station name.
\
Favorite station
37
.
^
The station “Favorite station
37
” has
been saved.
“Select station”
Using the “Select station” command, you can
select a saved station.
Sample dialog:
\
Select station.
^
Please say the station name.
\
Favorite station
37
.
The Voice Control System sets the station.
“Favorite station
37
” or e.g. “WNYC”
Using this command, you can directly select
a saved station.
37
Example for a voice name.
Voice Control System radio
253
Control systems
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 253
Z