Filter
Top Products
X
Press button a again if you would like
to change the current status.
After the function has been activated,
ATTENTION ASSIST indicator À appears
on the left-hand side of the multifunction
display.
For more information on ATTENTION ASSIST,
see (Y page 355).
Switching Blind Spot Assist on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Blind Spot Assist function
X
Press button a.
X
Press button a again if you would like
to change the current status.
Depending on the previous status, Blind
Spot Assist will be Enabled or Disabled
For more information on Blind Spot Assist,
see (Y page 359).
Switching Lane Keeping Assist on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Lane Keeping Assist function
X
Press button a.
X
Press button a again if you would like
to change the current status.
After the function has been activated, the
Lane Keeping Assist indicator Ã
appears on the left-hand side of the
multifunction display.
For more information on Lane Keeping
Assistance, see (Y page 362).
Service menu
In the Service menu the following functions
are available:
R
Vehicle status message memory
(Y page 233)
R
Checking tire inflation pressure
electronically with the Advanced TPMS
(Y page 414)
R
Calling up the maintenance service
indicator display (Y page 439)
R
Checking engine oil level (S 600 and
S 65 AMG) (Y page 406)
Vehicle status message memory
Use the vehicle status message memory
function to scan malfunction and warning
messages that may be stored in the system.
Such messages appear in the multifunction
Instrument cluster control system
233
Control systems
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 233
Z