Filter
Top Products
External authorization
Certain security settings in your mobile
phone may prevent COMAND from finding
your mobile phone. In this case, you might
want to check if your mobile phone can
recognize the COMAND. The Bluetooth
®
device name of COMAND is MB Bluetooth.
X
Select Data/Connections Q
Bluetooth Telephones.
X
Go to Update and select Options Q
External Authorization.
X
Activate the Bluetooth
®
search on the
mobile phone. Refer to mobile phone
operating instructions for detail.
X
Select MB Bluetooth on the mobile phone.
X
When prompted, enter the passkey into
COMAND and the mobile phone
(Y page 153).
Show details
Details can be displayed for each mobile
phone in the Bluetooth
®
phone list.
X
Select Data/Connections Q
Bluetooth Telephones.
X
Choose the mobile phone from the list and
select Options Q Details.
The following mobile phone details appear:
R
Bluetooth
®
name
R
Bluetooth
®
address
R
Availability status
R
Authorization
R
Bluetooth
®
Class (mobile phone,
notebook, etc.)
X
Closing detail display: Slide XVY.
Deauthorizing the mobile phone
X
Select Data/Connections Q
Bluetooth Telephones.
X
Choose the mobile phone from the list and
select Options Q De-authorize.
You will be asked whether you want to
deauthorize the device.
X
Select Yes.
i
You should delete the device name MB
Bluetooth from the Bluetooth
®
list of the
mobile phone before authorizing that
mobile phone again.
Connecting another mobile phone
You can switch between several mobile
phones that you have authorized.
i
Switching to another authorized mobile
phone is only possible while no phone calls
are being made.
X
Select Data/Connections Q
Bluetooth Telephones.
X
Select the mobile phone from the
Bluetooth
®
phone list.
X
Confirm the selection.
The selected mobile phone is connected
provided it is within Bluetooth
®
range and
Bluetooth
®
is activated on the respective
device.
You can only connect one mobile phone at
a time. The currently connected mobile
phone is indicated by a dot # in the
Bluetooth
®
phone list (Y page 153).
Main telephone menu
When the connected mobile phone is ready,
the following display appears:
154
COMAND telephone
Control systems
221_AKB; 6; 20, en-US
d2ugruen, Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 154