Filter
Top Products
G3X Installation Manual – Software, Configuration, Databases, and XM Activation Page 7-1
190-01115-01 Revision A
7 Software, Configuration, Databases, and XM Activation
7.1 Configuration Mode
Some software loading and all configuration settings are performed in the configuration mode. To enter
configuration mode, hold down the left-hand softkey (softkey #1) while powering on the GDU 37X. If
more than one GDU 37X is installed, hold down softkey #1 on PFD1.
7.2 Software/Audio Data Identification
7.2.1 LRU Software Version Identification
Do the following steps to verify the unit’s current software version(s):
1. Turn on the unit in configuration mode.
2. Use the FMS Joystick to select the CONFIG MAIN page (if needed).
3. Note the displayed software version.