Filter
Top Products
Page 6-26 G3X Installation Manual – Antennas
Revision A 190-01115-01
6.6.4 Non-structural Installation to Airframe
Internal Non-structural Installation
Figure 6-28 and Figure 6-29 show examples of under the fabric skin non-structural mounting of the
antenna to the airframe of a tube-and-fabric aircraft.
In Figure 6-28, a bracket is made to attach to the airframe, just under the fabric for a teardrop antenna
installation. The doubler plate and mounting hardware described in the generic installation (Section
6.6.1) are used with the bracket as the antenna mounting surface. In Figure 6-29, a similar case is shown
using the generic installation of the ARINC 743 footprint antenna. The doubler plate is optional for this
type of installation with either the Teardrop or the ARINC 743 antenna.
Figure 6-28. Example Teardrop Antenna Installation In Airframe Under Fabric Skin
Figure 6-29. Example ARINC 743 Footprint In Airframe Under Fabric Skin