Filter
Top Products
G3X Installation Manual – Post Installation Checkout and Calibration Procedures Page 8-11
190-01115-01 Revision A
3. Unlock the GSU Page by pressing softkeys 2, 3, 4 in order (if needed).
4. Ensure that all the required status boxes are checked (Tables 8-2 and 8-3). The GMU 44 and
GSU 73 units must be communicating with the GDU 37X, and the GPS antenna must have
clear view of the sky or a GPS repeater to produce positive status indications.
5. On the GSU Status Page, use the FMS Joystick to select MAGNETOMER.
6. Use the FMS Joystick to highlight the Calibrate button, press the ENT Key.