Raymarine A65 GPS Receiver User Manual


 
18 A65 GPS Chartplotter
1.4 The Simulator
The A65 display includes a simulator
mode, with which you can practice operating
your display without data from a GPS antenna or a DSM. Before installation,
connect the display to a 12VDC power supply, fused at 4 amps by attaching the
red wire from the power lead to positive (+) and the black lead to negative (–).
The simulator mode is switched on/off in the System Setup Menu.
1. Press MENU. The main Setup window is displayed.
2. Use the trackpad (up/down) or rotary knob to highlight System Setup.
3. Press the trackpad (right) to select.
4. Use the trackpad (up/down) or rotary knob to highlight Simulator.
5. Press the trackpad (right) to select.
6. Press the trackpad (up/down) to highlight ON.
7. Press
ENTER to accept.
8. Press
CANCEL twice to return to the display screen.
The SIMULATOR message flashes at the top of the screen and simulated data is
displayed.
47
ft
D7938-2
ZOOM
ZOOM
FISHFINDER
SETTINGS
FISHFINDER
SETTINGS
A-SCOPE
A-SCOPE
PRESENTATION
PRESENTATION
BOTTOM
LOCK
BOTTOM
LOCK
200 kHz
48 8
ft
20
0
40
60
12nm N-UP (RM)
Csr Pos N 26°42.618 W 078°31.961
MENU