Filter
Top Products
58
(2) MELSECNET/H (MELSECNET/10 mode) remote I/O station
Create a project for the MELSECNET/H (MELSECNET/10 mode) remote I/O station.
If GX Configurator is not used, proceed from step 1 to 3 and skip to step 6, the PLC write operation.
1. Create a project of GX Developer.
Select "QCPU (Q mode)" for "PLC series" and "Remote I/O" for "PLC Type".
[Project] [New project]
2. Add the Q62DAN to the project.
[Parameter] [PLC parameter] [I/O assignment]