Mitsubishi Electronics QJ72LP25GE Automobile Electronics User Manual


 
48
The following table lists the availability of the communication test for each station. The communication test cannot be
performed between MELSECNET/H (MELSECNET/10 mode) remote I/O stations.
(1) In the same network
: Supported ×: Not supported
*1 Supported only on the remote master station where the AnUCPU or AnUSCPU is mounted.
*2 Supported only on the remote master station where the QnACPU or QnASCPU is mounted.
*3 Supported only when the communication-target network module is compatible with the QnA series.
(2) In another network
: Supported ×: Not supported
*1 Supported only on the remote master station, control station, or normal station where the AnUCPU or AnUSCPU is
mounted.
*2 Supported only on the remote master station, control station, or normal station where the QnACPU or QnASCPU is
mounted.
*3 Supported only when the communication-target network module is compatible with the MELSECNET/10 QnA series.
Host station Remote master station
MELSECNET/H (MELSECNET/10 mode)
remote I/O station
Destination station
MELSECNET/H (MELSECNET/10 mode)
remote I/O station
Remote master station
GPPA
*1
×
GPPQ
*2
×
GX Developer
GX Works2 ×
*3
Host station
Remote master
station
Control station/
normal station
MELSECNET/H (MELSECNET/10 mode)
remote I/O station
Destination station
MELSECNET/H (MELSECNET/10 mode)
remote I/O station
Remote master
station
Control station/
normal station
GPPA
*1 *1
××
GPPQ
*2 *2
××
GX Developer
GX Works2 × ×
*3 *3