Filter
Top Products
38
• QJ72LP25G, QJ72LP25GE, QJ72BR15
(5) Connectors
• QJ72LP25-25, QJ72LP25G, QJ72LP25GE: IN connector, OUT connector
• QJ72BR15: Coaxial connector
(6) RESET switch
Reset the MELSECNET/H (MELSECNET/10 mode) remote I/O station. Press the switch for one second or longer
to reset. If not, the modules on the station cannot be reset normally. If the modules have not been reset normally,
perform the reset operation again.
(7) Serial number display
The serial number on the rating plate is displayed.
Setting Description
0Online
1 Self-loopback test
2 Internal self-loopback test
3 Hardware test
4 to 7 Use prohibited
8 Online (MELSECNET/10 mode)
9 to F Use prohibited
Connect an optical fiber cable connector.
1) IN: Reverse loop sending
2) IN: Forward loop receiving
3) OUT: Forward loop sending
4) OUT: Reverse loop receiving
Connect an F-type connector for coaxial cables.
1)
2)
3)
4)
1)
2)
3)
4)
QJ72LP25G,
QJ72LP25GEQJ72LP25-25