Filter
Top Products
32
Reference
Creating Waypoints
Additional Options For Creating Waypoints
Waypoints may also be created by manually entering position coordinates through the Points tab
of the Main Menu. This method can be useful for creating a waypoint at a specific latitude/longitude
position from a chart.
To create a new waypoint by entering location coordinates:
1. Press MENU twice to display the Main Menu. Highlight the ‘Points’ tab and press MENU.
2. Highlight ‘Create Waypoint’ and press
ENTER. The ‘New Waypoint’ page appears, with the next
available waypoint number and the receiver’s last know position as the default name and position.
3. Use the ARROW KEYPAD to highlight the position field and press
ENTER. Use the ARROW
KEYPAD to enter the desired position coordinates and press ENTER when finished.
4. To change the name, symbol, or enter comments, depth, or water temp,
highlight the appropriate
field and press ENTER. Make your changes and press ENTER when finished.
5. Use the ARROW KEYPAD to highlight ‘OK’ and press
ENTER to save the waypoint.
A waypoint may also be created by “projecting” the distance and bearing from a specific location to
a new location. Start by accessing the ‘New Waypoint’ page or the ‘New Map Waypoint’ page.
To create a new waypoint by projecting its location:
1. To project the waypoint from your current location, be sure the field to the right of the word ‘From’
reads ‘Current Position’ (if not, highlight the field and press
ENTER, highlight ‘Current Position’ and
press ENTER).
2. To select a map location from which to project a waypoint, highlight the field next to ‘From’ and
press ENTER. The ‘Find’ screen appears. Highlight ‘Other Position’ and press ENTER. Use the zoom
IN key and ARROW KEYPAD to highlight the desired position on the map and press ENTER.
Highlight the position field and use the
ARROW KEYPAD to enter the desired
position coordinates.
Select a point from which to
project a new waypoint.