Filter
Top Products
SECTION 6
GPS Receiver
Reference
4. To insert a waypoint in the route, highlight the waypoint that
will immediately follow the new route waypoint and press
MENU. Apop-up menu appears with additional options.
Highlight Insert Wpt and press ENTER to display a blank
line for the new waypoint. Enter the name of the new way-
point, using the ARROW Rocker Pad and press ENTER.
5. To delete a waypoint from the route, highlight the waypoint
you wish to delete and press MENU. A pop-up menu
appears with additional options. Highlight Remove Wpt'
and press ENTER.
6. To edit the route from the map display, press MENU from
the Route Plan Page. Highlight Show Map and press
ENTER. Use the ARROW Rocker Pad to place the cursor
on the desired waypoint and press MENU. A pop-up menu
appears. Select the desired option and press ENTER. If
Move is selected, move the cursor to the desired location
and press ENTER to accept the change.
6.11.2 Route Planning
The Route Plan Page also displays trip planning
information for each leg or the entire route. Available
information includes desired course, time to waypoint,
distance to waypoint, required fuel and sunrise/sunset
times at the waypoint location.
To use the trip planning features:
1. To select the desired planning figure, highlight the desired
route from the Route List and press ENTER to display the
Route Plan Page. One of ten available planning figures
appears to the right of each route waypoint. Use the
LEFT/RIGHT keys on the ARROW Rocker Pad to select
the desired item.
2. To enter planning information, Press MENU and select
Setup Plan from the options list. Enter the figures for
speed, fuel flow, departure time and departure date. Press
QUIT to return to the Route Plan Page.
Fuel flow rates on your NavTalk are measured in
“units per hour”. System setting changes for units of
measure (statute, nautical or metric) do not affect the
fuel flow measure. You should enter fuel flow rates
based upon available information for your vehicle
(operator’s manual, performance specifications, etc.) and
make note of the desired units of measure (gallons,
liters, etc.)
85
Inserting a Waypoint in a
Route Plan
Trip Planning Feature Page
Selecting “Setup Plan”
NvTlkGPS.qxd 2/1/00 4:13 PM Page 25