Filter
Top Products
46
Cell Phone
Reference
SECTION 5
bers those that you would like to redial. The list
will retain the last nine dialed numbers from the
PhoneBook and manually dialed numbers. A
scroll bar will appear when there are more num-
bers than can be displayed. Highlight the name
or number and press SEND to redial.
5.4.1 Redialing Numbers using the Auto
Redial Feature
You can automatically redial a phone number
when the cellular cannot be accessed because of
system traffic, poor signal, etc. You can auto-
redial the number up to nine times. This feature
is programmed from the Phone Page of the Setup
Program. It will not redial a busy number or an
unanswered call. Refer to Page 48.
5.5 Using the Speed Dial Feature
The Speed Dial Feature allows you to view
name or number Phone Keypad assignments,
and hold the number key corresponding to the
Speed Dial List number for more than one sec-
ond to dial that phone number from anywhere
on the NavTalk. There are nine entry spaces on
the Speed Dial list. Names and numbers may be
added to the Speed Dial list when they are
recorded using the “New PhoneBk #” menu.
They can also be added from the existing list of
names in the PhoneBook by using the “Edit” fea-
ture to assign a name to a Speed Dial position .
To enter new names and numbers on the
Speed Dial Page:
1.Use the PAGE button to acquire the PhoneBook
Page, then press MENU to enter a new name
and number, or edit an existing entry.
2.Highlight the desired entry from the PhoneBook
and press ENTER. If entering a new name and
number, press MENU instead of ENTER to bring
up a New PhoneBk # display.
3.Enter the name and number and select a position
on the Speed Dial list that is unused then high-
light Done and press ENTER.
Remember, there are only 9
positions on the Speed Dial
List. Be certain to select an
unused position or a Speed
Dial number you want to
overwrite.
When using Auto-Redial,
select the number of times
(up to 9) for
Redialing a number.
NavTlkOM.qxd 2/1/00 2:46 PM Page 56