Filter
Top Products
93
SECTION 6
GPS Receiver
Reference
6.13.2 Timers Settings
User Timer - lets you select a count up or count
down timer. For a count down timer you may also spec-
ify the count down duration.
To select a user timer setting:
1. For a count down timer, highlight the User Timer field in the
right-hand column, press ENTER and enter the count dura-
tion using the ARROW Rocker Pad. Press ENTER to
accept., thenwith the left-hand column highlighted and
press ENTER to view the User Timer options. Select Down
and press ENTER.
2. For a count up timer, highlight the User Timerfield in the
left-hand column, press ENTER and select Up. Press
ENTER to confirm.
3. To reset the timer or turn the timer off, highlight the User
Timer field in the left-hand column, press ENTER and
select Reset or Off (as appropriate). Press ENTER to con-
firm.
Battery Timer - provides a running count of how
long the NavTalk has been in operation with the current
batteries. The timer automatically stops when using an
external power source. The timer will automatically
reset when depleted batteries are replaced, but can also
be manually reset.
To select a battery timer setting:
1. Highlight the Battery Timer field in the left-hand column
and press ENTER.
2. Select Off, On or Reset (as appropriate) and press
ENTER.
Since Midnight - provides a running count of how
long the NavTalk has been in operation since midnight
of the current day.
Since Factory Reset - provides a running count of
total NavTalk operating time since the receiver was
shipped from the factory.
Timers Setup Page
NvTlkGPS.qxd 2/1/00 4:13 PM Page 33