Filter
Top Products
99
SECTION 6
GPS Receiver
Reference
6.14.5 Alarms Settings
Clock Alarm - uses the internal clock to provide
an ‘Alarm Clock’ message at the time you set.
To enable/disable the alarm clock
1. Highlight the Clock Alarm field and press ENTER.
2. Select On or Off (as desired) and press ENTER.
3. If enabling the alarm, highlight the time field (to the immedi-
ate right) and press ENTER. Enter the alarm time using the
arrow keypad and press ENTER.
The NavTalk must be turned on when the alarm time is
reached. Otherwise, the message will not occur.
Arrival Alarm - provides an alarm message once
you’re within a set distance from your destination way-
point. As you approach the destination waypoint, an
‘Arrival at ____’ message occurs when you are within
the alarm distance you entered.
Off Course Alarm - provides an alarm message
(‘Off Course Alarm’) when you deviate off course
beyond the specified limits.
To set the arrival and/or off course alarms:
1. Highlight the Arrival Alarm or Off Course Alarm field and
press ENTER.
2. Select On or Off (as desired) and press ENTER.
3. If enabling the alarm, highlight the alarm distance field (to
the immediate right) and press ENTER . Enter the alarm
distance using the ARROW Rocker Pad and press ENTER.
Alarms Setup Page
NvTlkGPS.qxd 2/1/00 4:13 PM Page 39