Filter
Top Products
APPENDIX C
Cellular Phone
Dial-String
Codes
NavTalk Dial String Codes
C - Calling card PIN, insert were PIN should be used as a DTMF string,
the user enters PIN from the Phone Setup page.
D - DTMF Tones, e.g. D728987 plays the DTMF tones for 728987 when
in a call.
L - Link telephone number, stops and moves to the PhoneBook page,
highlight a number and press SEND, the number will be sent as a
DTMF string.
P - Pause in dial string 5 seconds per “P” character entered.
Q - Query Position, queries other phone for position, also queries another
phone for position from the Dialing Page by selecting Query Location
option.
NOTE: This feature is active only during a call.
S - Stop dialing until SEND key is pressed.
T - Transmit GPS Position via DTMF tones, also transmit position while
in a call by holding SEND for 2 seconds, also transmits position from
the Dialing Page by selecting the Send Location option.
NOTE: This feature is active only during a call.
# - Provides a DTMF tone for automated phone services when entered at
the appropriate point in a dial string.
* - Provides a DTMF tone for automated phone services when entered at
the appropriate point in a dial string.
.
105
NavTlkOM.qxd 2/1/00 2:46 PM Page 75