Filter
Top Products
7. ALARMS
7-5
7.5 Anchor Alarm
The anchor alarm informs you that your boat is moving when it should be at rest.
: Alarm
Own ship's
position
Setting range
How the anchor watch alarm works
1. Open the ALARMS menu.
2. Rotate the [ENTER] knob to choose ANCHOR ALARM and push the
[ENTER] knob.
Off
0.00 nm
3. Rotate the [ENTER] knob to choose “x.xx (value) nm” and then push the
[ENTER] knob.
4. Rotate the [ENTER] knob to enter the value.
5. Push the SAVE soft key and [MENU] key in order to close the menu.
7.6 STW Alarm
The STW alarm warns you when your boat’s speed is over the speed range set.
1. Open the ALARMS menu.
2. Rotate the [ENTER] knob to choose STW ALARMS and then push the
[ENTER] knob.
Off
Max +32.00 F
Min +32.00 F
3. Confirm that the cursor is located at the top line and then push the [ENTER]
knob.
4. Rotate the [ENTER] knob to choose On and then push the [ENTER] knob.
5. Rotate the [ENTER] knob to choose Max, and then push the [ENTER] knob.
6. Rotate the [ENTER] knob to enter the value, and then press the SAVE soft
key.
7. Rotate the [ENTER] knob to choose Min, and then push the [ENTER] knob.
8. Enter the value for Min, similar to how you did for Max.
9. Press the SAVE soft key and [MENU] key in order to close the menu.