Filter
Top Products
4. WAYPOINT
4-8
4.5 Other Waypoint List Functions
This section shows you how to execute the various functions available on the
WAYPOINT LIST.
4.5.1 Filtering waypoints by mark shape
You may filter waypoints in the waypoint list by mark shape. This is useful when
you are looking for waypoints of a specific shape.
1. Open the WAYPOINT LIST.
2. Rotate the [ENTER] knob to choose ICON at the bottom of screen.
3. Push the [ENTER] knob to show the ICON window.
ICON
SELECT
ALL
Icon window
4. Rotate the [ENTER] knob to choose SELECT and then push the [ENTER]
knob.
The waypoint mark shape selection window appears.
Waypoint mark shape selection window
Note: ALL shows all waypoints.
5. Rotate the [ENTER] knob to choose the mark shape which you want to
search, and then push the [ENTER] knob.
The list shows waypoints with the chosen mark shape.
6. Press the [CLEAR] key twice to close the list.
To display all waypoints, choose ALL at step 4 and then press the [CLEAR] key.