Filter
Top Products
7-1
7. ALARMS
The plotter section has seven conditions which generate both audio and visual
alarms: arrival, XTE, temperature, depth, anchor, STW and grounding alarms.
When an alarm is violated both audio and visual alarms are released. You may
silence the audio alarm with the [CLEAR] key. The visual alarm remains on the
screen until the offending alarm is deactivated or the reason for the alarm has
disappeared.
You may set up the alarms on the ALARM menu.
6. Press the [MENU] key to show the menu bar.
Menu Bar
GENERAL PLOTTER MAP ALARMS ADVANCED INFO FIND
Menu bar
7. Rotate the [ENTER] knob to choose ALARMS and then push the [ENTER]
knob to show the ALARMS menu.
AUDIBLE ALARM Off
ARRIVAL ALARM Off
XTE ALARM Off
TEMPERATURE ALARM Off
DEPTH ALARM Off
ANCHOR ALARM Off
STW ALARM Off
GROUNDING ALARM Off
GROUNDING ALARM RANGE 0.25 nm
GROUNDING ALARM REPORT
FISH ALARM Off
FISH ALARM (B/L) Off
Alarms menu