Filter
Top Products
Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual Section 4: Configuration
3-9000-765 Rev D March 2013
Using AMS Device Manager to configure the meter 83
d. Click the All Variables tab to view a graphical display of the Primary, Secondary,
Third and Fourth Variables.
Figure 4-6 AMS Device Manager - Service T
ools All Variables status indicators
8. Click
OK to return to the Overview page.
9. Enable the Write Protect switch on the CPU Module to protect the meter’s
c
onfiguration.
10. From the Overview window, click
Display Meter K-Factors. K-Factors are a read-only
values calculated from the Full scale volumetric flow rate used with frequency outputs
and the Maximum frequency for frequency output.
Figure 4-7 Display Meter K-Factors
Click
Next to return to the Device Manager Overview page.