Filter
Top Products
76 Field Setup Wizard
Section 4: Configuration Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual
March 2013 3-9000-765 Rev D
Note: When connected to a meter with the optional local display, reverse flow
direction is indicated with a minus sign (negative) before the value(s) shown on
the display.
VEL — Average flow velocity
• Ft/S – Feet per second
• M/S – Meters per second
SOS — Average sound velocity
• Ft/S – Feet per second
• M/S – Meters per second
TEMP — Flow-condition temperature
• DEGF – Degrees Fahrenheit
• DEGC – Degrees Celsius
PRESS — Flow-condition pressure
• PSI – Pound per square inch
• MPA – Megapascals
FRQ1A — Frequency channel 1A
• HZ – Hertz
FRQ1B — Frequency channel 1B
• HZ – Hertz
KFCT1 — Frequency 1 K-factor
• BBL – Barrels
• GAL – Gallons
• L – Liters
• CM – Cubic Meters
• MCM – Thousand Cubic Meters
FRQ2A — Frequency channel 2A
• HZ – Hertz
FRQ2B — Frequency channel 2B
• HZ – Hertz
KFCT2 — Frequency 2 K-factor
• BBL – Barrels
• GAL – Gallons
• L – Liters
• CM – Cubic Meters
• MCM – Thousand Cubic Meters
AO1 — Analog Output 1 current
• MA – Milliamperes
AO2 — Analog Output 2 current
• MA – Milliamperes
Table 4-1 Local display labels, descriptions and valid units
Local Display labels, descriptions and units