Emerson 3812 Automobile Parts User Manual


 
Important safety instructions
Daniel Measurement and Control, Inc. (Daniel) designs, manufactures and tests products to
function within specific conditions. Because these products are sophisticated technical
instruments, it is important that the owner and operation personnel strictly adhere both to the
information printed on the product and to all instructions provided in this manual prior to
installation, operation, and maintenance.
Daniel also urges you to integrate this manual into your training and safety program.
BE SURE ALL PERSONNEL READ AND FOLLOW THE INSTRUCTIONS IN THIS MANUAL AND ALL
NO
TICES AND PRODUCT WARNINGS.
Product owners (Purchasers):
U
se the correct product for the environment and pressures present. See technical data
or product specifications for limitations. If you are unsure, discuss your needs with your
Daniel representative.
In
form and train all personnel in the proper installation, operation, and maintenance of
this product.
T
o ensure safe and proper performance, only informed and trained personnel should
install, operate, repair and maintain this product.
V
erify that this is the correct instruction manual for your Daniel product. If this is not
the correct documentation, contact Daniel at 1-713-827-6314. You may also download
the correct manual from:
http://www.daniel.com
Save this instruction manual for future reference.
If
you resell or transfer this product, it is your responsibility to forward this instruction
manual along with the product to the new owner or transferee.
A
LWAYS READ AND FOLLOW THE INSTALLATION, OPERATIONS, MAINTENANCE AND
TROUBLESHOOTING MANUALS AND ALL PRODUCT WARNINGS AND INSTRUCTIONS.
Do no
t use this equipment for any purpose other than its intended service. This may
result in property damage and/or serious personal injury or death.
Installing, operating or maintaining a Daniel product improperly could lead to serious injury or
death from explosion or exposure to dangerous substances. To reduce this risk:
Comply with all information on the product, in this manual, and in any local and national
codes that apply to the product.
Do not allow untrained personnel to work with this product.
Use Daniel parts and work procedures specified in this manual.