Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual Section 2: Mechanical installation
3-9000-765 Rev D March 2013
Use of appropriate safety engineered swivel hoist rings in meter end flanges 35
8. Always use separate slings for each hoist ring. NEVER reeve one sling through both
hoist rings. The slings must be of equal length. Each sling must have a load rating that
equals or exceeds the hoist ring load rating. The angle between the two slings going to
the hoist rings must never exceed 90 degrees or the load rating of the hoist rings will be
exceeded.
Figure 2-9 90 Degree angle between slings