Filter
Top Products
56
57
4. Repeat step 3 for each point you want to include in your route.
5. Optional: If you do not want to include your current GPS position as a route point, use the
arrow keypad to highlight Current Position and press ENTER. Use the arrow keypad to
highlight Remove and then press ENTER.
6. Use the arrow keypad to highlight the Calculation Method drop-down list and press ENTER.
Then, highlight Road or Direct and press ENTER.
7. Highlight the Navigate button and press ENTER to calculate the route. If the calculation is
successful, the route is highlighted on the Map Page.
To Simulate a Route
You can preview a route on the map using the Simulate Navigation feature. The route is highlighted on
the map and the device beeps at each applicable turn.
1. From the Routes Page, use the arrow keypad to highlight the route that you want to simulate and
press ENTER.
2. Press MENU, highlight the Simulate Navigation option, and then press ENTER. The message,
“Simulate Navigation will turn off Track Recording mode” displays. Highlight OK and press
ENTER. The cursor goes into simulate mode and plays the route on the map.
3. To end simulation, press MENU, highlight the Stop Simulation option, and press ENTER.
To Get Back on Track When Off Course
1. Ensure you are navigating against a route.
2. Press MENU, highlight the Back on Track option, and press ENTER. The route recalculates
based on your current position and adds that location to the route itinerary.
To Edit a Route
1. From the Routes Page, use the arrow keypad to highlight the route that you want to edit
and press ENTER.
2. To rename the route, use the arrow keypad to highlight the Route Name field and press
ENTER. Use the keyboard to enter the new name text. Then, highlight OK and press ENTER.
3. To add a route point, use the arrow keypad to highlight Add Point and press ENTER.
4. To use the Find functions to add the point, highlight Use Find and press ENTER (for more
information, see The Find Page section that starts on page 41). After you find the point,
highlight the result, press ENTER, and then highlight Add and press ENTER to add the
search result as a point in the route.
OR
To select a route point that is on the map, highlight Use Map and press ENTER to pan to
the location on the map that you want to use as a route point. Once you move the cursor to
the location you want, press ENTER, and then press QUIT to return to the Routes Page.
5. To change the calculation method, use the arrow keypad to highlight the Calculation
Method drop-down list and press ENTER. Then, highlight Road or Direct and press ENTER.
6. To immediately navigate against the edited route, highlight the Navigate button and press
ENTER.
OR
If you do not want to navigate against the edited route, press QUIT.
To View Route Directions
Route directions are available only when navigating against a route. If you are already navigating,
highlight the Directions button and press ENTER to view the directions.
1. From the Routes Page, highlight a route that you want to navigate and press ENTER.
2. Highlight the Navigate button and press ENTER.
3. Press PAGE until the Route directions information displays.
To Reverse a Route
1. From the Routes Page, use the arrow keypad to highlight the route that you want to reverse.
2. Press ENTER.
3. Press MENU.
4. Use the arrow keypad to highlight Reverse Route and press ENTER. The route is reversed.
To Delete a Route
1. From the Routes Page, use the arrow keypad to highlight the route that you want to delete.
2. Press ENTER.
The Routes Page
Tip: To exit Navigation mode,
press MENU, use the arrow
keypad to highlight Stop Navi-
gating,andthenpressENTER.
Roadroutewithtwopoints
RouteDirections(onlyavailable
when navigating)