Filter
Top Products
ImagePRO™ Quick Start Guide
Step 1: Connect Input Sources to ImagePRO™
1. Connect analog video source to the ImagePRO™ using the three universal video inputs.
2. Connect any SDI video source to the SDI video input (ImagePRO-SDI™ and ImagePRO-HD™ only).
3. Connect DVI video source to the DVI video input (ImagePRO-HD™ only).
Step 2: Connect ImagePRO™ to Output Devices
1. Connect Hi-res video output devices to the ImagePRO™ using the 5 BNC or HD-15 output connectors.
2. Connect NTSC or PAL monitor using the Composite or S-Video Output connectors
3. Connect SDI video devices to the SDI video output (ImagePRO-SDI™ and ImagePRO-HD™ only).
4. Connect DVI Digital Flat panel display to the DVI video output (ImagePRO-HD™ only).
Step 3: Power Up
Connect ImagePRO™ to AC power using the power cord supplied with the unit. Locate the power switch on the power entry module
at the rear of the unit and turn the power on. When initialization is complete, the front panel display will indicate that the unit has
powered up successfully. The Status screen is displayed when the initialization process is complete.
Step 4: Select and Save the desired Output Format
Press the SETUP button and then using the ADJUST knob, scroll down to “Output” and press the SEL key to enter the Output Setup
menu. Press SEL key to select the Output Format field and then use the ADJUST knob to locate the desired output format. Press
the SEL key again to select this output format. Now scroll down to Save Config and press the SEL key to save this format as the
default.
Press the ESC key to leave the Output Setup menu.
Step 5: Configure Input Sources
ImagePRO™ will automatically lock to video applied to the inputs and will make a attempt to match the Video format in the following