Filter
Top Products
Manual # 26-0302000-00 / Revision E ImagePRO – Multi Format Image Processor
43
Formats Submenu
This menu is used to define and save a new video format, or to edit and save a previously-defined format.
These saved formats are stored in a user library, which is searched during the auto-acquisition process
before the standard system library. All saved formats are available as input formats on any input channel
and as output formats. A maximum of 32 custom formats may be stored.
NOTE:
Format parameters entered in the edit format menu are saved in non-volatile memory by using the Save As
menu item. If the Save As menu item is not selected, the information will not be restored upon the next
system power up sequence. If the user performed changes and did not save them the following message will
be displayed upon exiting the System menu by pressing ESC, SETUP, PAN, TEST PAT and ZOOM.
The user may select Yes to save the changes or No to continue operation without saving the changes.
<format_name> Selection
This unlabeled menu selection allows the user to select the format to edit. The choices consist of the names of the
standard formats library (excluding TV standard formats) plus any previously-defined formats. The initial value is
720x480p.
Save As Submenu
This menu allows the user to save the current format settings to an existing or new name.
FORMATS
> [format_name]
Save As >>
Delete >>
H Total [val]
H Active [val]
H Front Porch [val]
H Sync [val]
H Rate (KHz) [val]
V Total [val]
V Active [val]
V Front Porch [val]
V Sync [val]
V Rate (Hz) [val]
Interlaced [val]
Save Custom Format?
<SEL> = Yes
<ESC> = No