Filter
Top Products
32 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
raster box is intentionally “broken” to allow the user to view the input video behind it and align the input
video to the raster box precisely.
Contrast And Brightness
The adjustment range is 75.0% to 125.0%. 100% is the default setting for both contrast and brightness.
The Contrast and Brightness controls allow the operator to adjust the overall contrast and brightness of the image.
Color Balance Submenu
The menu entries depend on the current input type. For RGB input, the menu is:
The adjustment range is -25.0% to +25.0%. 0.0% is the default setting for both contrast and brightness.
Each of the contrast and brightness settings operates in conjunction with the global contrast and brightness settings,
above.
For Composite, S-video, YpbPr, or SDI input, the menu is:
The Hue value is measured in degrees, and the range is -180 to +180. Hue is n/a for YPbPr inputs.
The saturation value is in percentage, and for composite and S-Video inputs ranges from 0% to 150%, with 100%
being the nominal value. For YPbPr and SDI inputs, the range is 75.0% to 125.0%.
The Reset All item is a command that sets all values back to their defaults.
Gamma
This selection allows the user to specify the Gamma associated with the current input. The value range is 1.0 to 3.0,
in steps of 0.1. Default gamma values are stored with each video format.
Aspect Ratio Submenu
COLOR BALANCE
> Red Contrast <val>
Red Bright <val>
Grn Contrast <val>
Grn Bright <val>
Blue Contrast <val>
Blue Bright <val>
Reset All
COLOR BALANCE
> Hue <val>
Saturation <val>
Reset All