Filter
Top Products
70 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
n - Input Aspect Ratio: n[0-5], 1:1 | 3:2 | 4:3 | 5:4 | 16:9 | Custom
cn - (Optional) Custom Input Aspect Ratio: (0.75 – 3.00)
NOTE: cn parameter is not required unless user selects Custom Input Aspect Ratio (i.e. n = 5)
Query:
IAR? in
Returns the Input Aspect Ratio of specified source in the format
= n cn
Example: IAR 1 5 2.0 (Sets aspect ratio of channel 1 to Custom and sets the custom aspect ratio to 2.0)
IAR? 1 (Queries Input aspect ratio of channel 1)
Command:
IAUTOC
Description: Auto Configure currently routed input. Only available if Input Sample mode is 1:1
Parameters: None
Example: IAUTOC (Auto Configures current input source)
Command:
IBRT in nnn.n
Description: Adjusts the Input Brightness value of the specified source.
Parameters: in - Input chnl [1-3]
nnn.n - Brightness value; Range 75 to 125%
Query:
IBRT? in
Returns the Input Brightness value of the specified source in the format
= nnn.n
Example: IBRT 2 110 (Adjusts input 2 Brightness to be 110%.)
IBRT? 2 (Queries Input Brightness of channel 2.)
Command:
ICNT in nnn.n
Description: Adjusts the Input Contrast values of the specified source.
Parameters: in - Input chnl [1-3]
nnn.n - Contrast value; Range 75 - 125%
Query:
ICNT? in
Returns the Input Contrast values of the specified source in the format
= nnn.n
Example: ICNT 1 100 (Adjusts input 1 Contrast to be 100%.)
ICNT? 1 (Queries Input Contrast of channel 1.)
Command:
ICPHO in nn
Description: Adjusts the Input Clock Phase Offset.
Parameters: in - Input chnl [1-3]
nn - Phase value; [-16..15]
Query:
ICPHO? in
Returns the Input Clock Phase Offset in the format
= nn
Example: ICPHO 1 15 (Adjusts the Input clock phase offset manually to 15 on input 1.)
ICPHO? 1 (Queries the Input clock phase offset of channel 1.)
Command: