Filter
Top Products
Manual # 26-0302000-00 / Revision E ImagePRO – Multi Format Image Processor
49
Effects Submenu
The effects menu selects the transition effect when switching between input channels. The user may select form the
following selections:
- Transition with Image Cut; The currently selected channel will be frozen, the new channel’s video will be acquired
and cut to the Output display.
- Transition with Black; The currently selected channel will fade to Black and then the new channel’s video will
transition in. The transition time will depend on the Transition time selected (1.0-5.0 seconds).
Note: Transition times provided are for switching applications with auto-acquisition turned off. When auto-
acquisition is on the transition time will be greater due to the additional time required to analyze the input
video timing.
- Transition with Logo; (ImagePRO-SDI & ImagePRO-HD only). This mode is only selectable if there is stored Logo
image in non-volatile memory. The currently selected channel will dissolve to the stored Logo image and then the
new channel’s video will dissolve in from the Logo. The transition time will depend on the Transition time selected
(1.0-5.0 seconds).
Note: Transition times provided are for switching applications with auto-acquisition turned off. When auto-
acquisition is on the transition time will be greater due to the additional time required to analyze the input
video timing.
EFFECTS
> Trans With [val]
Trans Time [val]