Filter
Top Products
46 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
If the format selected for deletion is currently an Input format used by any of the input channels or is the Input format
that is saved in an input configuration, the following screen will be displayed:
H,V Parameters
These selections set the H and V parameters (Total, Active, Front Porch, and Sync Width). The units are in pixels for
H and lines for V.
The possible range for any one is determined in part by the values of the others. Changing one value will not change
any other values, but it will limit the range available for other values. (Total = Front Porch + Sync Width + Back Porch
+ Active)
V Rate
This item sets the vertical sync rate of the format in Hz.
Computed_H_Rate
This line is updated to indicate the horizontal rate in KHz, computed from other parameters.
Interlaced
The value for this selection is either On or Off. When set to on, the V Total value will be forced to an odd number.
DELETE FORMAT FAIL
FORMAT IN USE/SAVED
IN INPUT CHNL/CFG
<ESC> = Continue